GENERIC DESCRIPTION
KOREVER - MATT SS150T2 is a vinyl acrylic
copolymer emulsion that is developed for all interior use on all masonry
surfaces of buildings in the humid tropics. It has excellent anti-fungus and
alkali resistance properties.
RECOMMENDED USES
As a finishing coat for plastered walls
& ceilings, cement, concrete, brick stucco, asbestos-cement sheets and hard/
soft boards, etc...
FEATURES
Good resistance to algae and fungal attack
Commendable resistance to light exposure
Good alkaline resistance
Easy application by roller and brush
Good adhesion on masonry
TECHNICAL SPECIFICATION
| Colour |
Refer to KCC standard
colour card |
| Finish |
Matt |
| Solids By Volume |
36% depending on colour |
| Theoretical Coverage |
12m2/L at 30 micron DFT |
| Dry Film Thickness |
30 - 35 microns per coat |
| Drying Time ( 27 deg.
C, 80% RH) |
Surface Dry:
30minutes Hard Dry: 1 hour |
| Re-Coating Interval |
1 hour |
| Thinning |
Clean fresh water |
| Thinning Ratio |
Ready for use, approx
0%~10% of thinning if desired |
METHOD OF APPLICATION
Brush, Roller or Spray
SURFACE PREPARATION
Surface must be thoroughly clean, dry, free of all loose dirt, chalk or grease.
On previously painted surface, wash using a high pressure water jet.
On surface previously affected by algae and fungi, apply a fungicidal wash treatment.
Unstable or powdery surface should be removed.
Do not apply in wet weather conditions or when water content in substrate is above 6%.
RECOMMENDED COATING SYSTEM
New or Powdery Surfaces
Sealer : 1 coat of Koresil Oil Based Sealer SP160
Topcoat : 2 coats of Korever-Matt Emulsion Paint SS150 Type 2
Normal and Sound Surfaces
Sealer : 1 coat of Koresil Water Based Sealer WP160
Topcoat : 2 coats of Korever-Matt Emulsion Paint SS150 Type 2
STANDARD REFERENCE
SS 150 Type 2
PACKING
5 Litres, 20 Litres
ISSUE DATE
23 Feb 2001
|
